Racing Coilover Suspension Shocks Kits Lexus 07-11 GS350 06-13 IS250 IS350 lowering kit

Details

Introduction

A coilover is an automobile suspension device. Thanks to built-in adjustability, coilovers offer the ability to be shortened or lengthened – lowering or raising the ride height of your vehicle through manual adjustment, without complex electronics or hydraulics. A coilover kit consists of a damper and a shock absorber with a coil spring around it. Maxpeedingrods provides performance aftermarket adjustable coilovers suspension kit compatible for Lexus series. You can enjoy a comfortable riding experience in all road conditions.

Application

Compatible for Lexus IS 250 / IS350 RWD 2nd Gen. 2006-2012

Compatible for Lexus GS350 RWD 2007-2011

Compatible for Lexus GS430 RWD 2007-2011

RWD Only, not fit for AWD

Specification

MaXpeedingrods Coilover kit is simply great for daily driver.

1.Product included: Complete coilovers 2 front and 2 rear, a pair wrench for height adjustment .

2.Adjustable Camber Plate: NO.

3.Adjustable Damper: 24 ways Adjustable Damper.

4.Spring rate: Front: 12 kg/mm (672 in/lbs) ;Rear: 9 kg/mm (504 in/lbs).

5.Adjustable height: Yes, lowering 1” to 3”.

6.Shock type: Twin tube.

7.Spring Preload: 7-10 mm.

8.Color: Red.

9.Warranty: one year.

Features

– Able to lower ride height by 1”-3”; allows user to have a more aggressive stance.

– Coilovers are 24-way adjustable. Rebound and Dampening adjustment which allows the user the ability to dial in your coilovers to any driving needs. The user can enjoy a comfortable riding experience in all road conditions.

– Pillow ball top mount — this design helps combat noise while tuning. It also improves the steering feel and response.

– Twin-Tube Shock design is used for low internal frictional resistance in order to increase efficiency and keep shock temps low.

– Height adjustment does not sacrifice damper stroke length.

– These coilovers are able to have their height adjusted without being taken out of the car.

– Most components of the suspension parts are made from 6061-T6 aluminum to increase strength and rigidity.

– High Tensile strength performance spring—Tested under a 600,000 time continuous compression test, the spring distortion was less than 0.04%. Plus, the special surface treatment improves the durability and performance.

– Adjustment tools included in the kit.

Notice

– No instruction included; Professional installation alignment suggested.

– Please check your car information before purchase. If you are not sure, please contact us for help

– No drilling, cutting, or modification necessary.

SPECIAL NOTES: Prior to installation, verify all hardware and properly tighten.