Universal T70 Turbo Turbocharger T3 .82 A/R + Oil Drain Return FEED Line Kit TCD

Details

Application

Perfect for all 1.8L-3.0L engines

Horse Power: Boost Horse Power up to 600HP

Cooling Type: Oil Cooled

Specification

Exhaust Inlet (Turbo Manifold) Flange: Standard T3 Flange

Exhaust Outlet (Downpipe) Flange: V-Band Flange

Turbine Trim: 62

Turbine Inducer Diameter: 74.4 mm

Turbine Exducer Diameter: 58.4 mm

Turbine A/R: 0.7

Compressor Trim: 57

Compressor Inducer Diameter: 56.6 mm

Compressor Exducer Diameter: 75 mm

Compressor A/R: 0.7

Oil Inlet: M121.25 2M81.25

Oil Outlet: 2M81.25

Bearing: Journal Bearing

Warranty: one year

Internal Wastegate: NO

OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm

OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm

Notes: This is a universal oil line kit. Not all the component parts will be directly bolt on your car.

You may still need some accessaries of your OEM oil line kit.

Notice

Please check the specifications carefully before placing orders. If you are not sure about these information, please feel free to contact us.

This is universal application turbo, so modification might be required for some vehicles.

Professional installation is highly recommended (No Instruction Included).

For any needs please contact us.

Replace, repair or reconnect air cleaner element per manufacturer’s manual to avoid compressor wheel damage.

Make sure the oil drain line is lower than the turbo itself.

Gasoline car must install a water cooling device to avoid overheating.

Ensure exhaust outlet are well sealed by welding.